You are here
Home > Ford > Off-Road Adventure: 1974 Ford Bronco on Everyman Driver

Off-Road Adventure: 1974 Ford Bronco on Everyman Driver

Fallback Image

1974 Ford Bronco on Everyman Driver with Dave EricksonThe original Ford Bronco was an Off-Road Vehicle, intended to compete primarily with Jeep CJ models and the International Harvester Scout. The Bronco’s small size riding on a 92-inch (2,337 mm) wheelbase made it maneuverable for some uses, but impractical as a tow vehicle. The Bronco was Ford’s first compact SUV.

Banner1

The idea behind the Bronco began with Ford product manager Donald N. Frey, who also conceived of the Ford Mustang; and similarly, Lee Iacocca pushed the idea through into production. In many ways, the Bronco was a more original concept than the Mustang; whereas the Mustang was based upon the Ford Falcon, the Bronco had a frame, suspension, and a body that were not shared with any other vehicle.

1974 Ford Bronco on Everyman Driver with Dave EricksonThe Bronco was designed under engineer Paul G. Axelrad. Although the axles and brakes were used from the Ford F-100 four wheel drive pickup truck, the front axle was located by radius arms (from the frame near the rear of the transmission forward to the axle) and a lateral track bar, allowing the use of coil springs that gave the Bronco a 34-foot (10.4 m)turning circle, long wheel travel, and an anti-dive geometry which was useful for snowplowing. The rear suspension was more conventional, with leaf springs in a typical Hotchkiss design. A shift-on the-fly Dana Corp. transfer case and locking hubs were standard, and heavy-duty suspension was an option.

The initial engine was the Ford 170 cu in (2.8 L) straight-6, modified with solid valve lifters, a 6-US-quart (6 l) oil pan, heavy-duty fuel pump, oil-bath air cleaner, and a carburetor with a float bowl compensated against tilting.

1974 Ford Bronco on Everyman Driver with Dave EricksonStyling was subordinated to simplicity and economy, so all glass was flat, bumpers were straight C-sections, the frame was a simple box-section ladder, and the basic left and right door skins were identical except for mounting holes.

The early Broncos were offered in wagon, halfcab, and a less popular roadster configuration. The roadster version was dropped and the sport package, which later became a model line, was added.

The base price was $2,194, but the long option list included front bucket seats, a rear bench seat, a tachometer, and a CB radio, as well as functional items such as a tow bar, an auxiliary gas tank, a power take-off, a snowplow, a winch, and a posthole digger. Aftermarket accessories included campers, overdrive units, and the usual array of wheels, tires, chassis, and engine parts for increased performance.

1974 Ford Bronco on Everyman Driver with Dave Erickson

The Bronco sold well in its first year (23,776 units produced) and then remained in second place after the CJ-5 until the advent of the full-sized Chevrolet Blazer in 1969. Lacking a dedicated small SUV platform, the Blazer was based on their existing full size pickup which was a larger and more powerful vehicle, offering greater luxury, comfort and space. The longer option list included an automatic transmission and power steering, and thus had broader appeal. Ford countered by enlarging the optional V8 engine from 289 cu in (4.7 L) and 200 hp (150 kW) to 302 cu in (4.9 L) and 205 hp (153 kW), but this still could not match the Blazer’s optional 350 cu in (5.7 L) and 255 hp (190 kW) (horsepower numbers are before horsepower ratings changed in the early to mid-1970s.)

1974 Ford Bronco on Everyman Driver with Dave EricksonIn 1973, the 170 was replaced by a 200 cu in (3.3 L) straight six, power steering and automatic transmissions were made optional, and sales spiked to 26,300. By then, however, Blazer sales were double those of the Bronco, and International Harvester had seen the light and come out with the Scout II that was more in the Blazer class. By 1974, the larger and more comfortable vehicles such as the Jeep Cherokee (SJ) made more sense for the average driver than the more rustically-oriented Bronco. The low sales of the Bronco (230,800 over twelve years) did not allow a large budget for upgrades, and it remained basically unchanged until the advent of the larger, more Blazer-like second generation Bronco in 1978. Production of the original model fell (14,546 units) in its last year, 1977.

The video below shows a 1974 Ford Bronco on an off-road adventure inside the Spokane ORV park in Riverside State Park in Washington state.

Wanna support the production of our weekly videos! Sure ya do! We’d appreciate it!!!

$10 One-Time Donation:   CLICK HERE
$2 a Month (cancel anytime):   CLICK HERE
$25 GoPro Camera Fund:    CLICK HERE

Connect with the Everyman Driver Network:
CLICK HERE – Subscribe to Everyman Driver Car Reviews on Youtube
CLICK HERE – Join Everyman Driver on Facebook
CLICK HERE — Follow Everyman Driver on Twitter

Similar Articles

Top